Pin Removal

‘93 F150 shift fork removal?

I’m trying to replace the 3-4 shift fork on my truck but I can’t get the roll pin out that holds the fork onto the shaft. The new fork didn’t come with another pin, so how can I remove the old one without damaging it? It’s the M5R2 (Mazda) transmission.

You can use a roll pin removing tool (other wise known as a small punch) and a small hammer to drive it out the other side of the shoft fork & shaft. a correct size nail would also work if you have no punch available. but they are pretty available at retail tool stores (aka sears & the like)

BERGEON 6745-100 PROFESSIONAL BRACELET PIN/ SCREW REMOVAL TOOL $552.92

Horotec Watch Bracelet Link Pin and Screw Remover - $284.99

100PCS.WATCH BAND LINK REMOVER TOOL WITH 2 SPARE PINS $200.00

Watch Band Link Strap Pin Remover Adjust Repair Tool $144.02

BERGEON 6744 BRACELET PIN REMOVAL TOOL $142.12

BERGEON 6744-3 BRACELET PIN REMOVAL TOOL $142.12

BERGEON 6744-1 BRACELET PIN REMOVAL TOOL $142.12

BERGEON 6744-2 BRACELET PIN REMOVAL TOOL $142.12

Complete Strap Band & Bracelet Changing & Link Pin Removal Kit for Orient Watch $114.71

Complete Watch Band Strap Change & Swiss Bracelet link pin Remover $114.71

16-Pc Deluxe Watch Repair Tool Kit W/ Link Pin Remover $109.25

Watch DIY Strap / Band / Bracelet adjustment pin removal sizing tools for Poljot $108.77

Rare Vintage Rolex SeaDweller 16600 green holder with pin removal tools $100.00

Watch Band Link Strap Pin Remover Adjust Repair Tool $91.51

Watch Band Link Strap Pin Remover Adjust Repair Tool $91.51

13pcs Watch Repair Tool\ Pin Remover\ Case opener Set $75.78

Horotec SWISS MADE Punch Set / Watch Link-Pin Removal $63.72

Horotec SWISS Punch Set for Watch Link-Pin Removal $63.71

16 Piece PC Watch Repair Tool Kit Set Pin Strap Remover $58.88

New 16pc Deluxe Watch Opener Tool Kit Repair Pin Remover $56.99

Watch Sizing Band Tool Link Pin Remover w/ 3 Extra Pins $53.88

Watch Band Strap Link Pin Spring Bar Remover Watchmaker Removal Repair Tool Blue $51.99

Watch Bracelet Pin Remover & Press Multipurpose Tools $49.99

Multipurpose Watch Band Pin Link Spring Bar Remover Press presser Repair Tool $49.99

Paylak TSLK4 Watch Band Pin Link Remover and Plier Sizi $49.83

Deluxe multi Watch Band Pin Remover Press Presser 0032 $44.99

Jewelers Deluxe Multi-Function Watch Link Pin Spring Bar Remover & Screw Press $41.95

20 PIECE WATCH REPAIR TOOL KIT SET PIN & BACK REMOVER $41.58

New Tools ,Watch Case Opener / Bands Pin Removal Tools $39.99

450 Spring Bars & 3 Watch Pin Link Band Remover Tools $39.99

19 PIECE WATCH REPAIR TOOL KIT FOR REPLACING BATTERY BAND PIN REMOVER IN CASE $35.99

New Tools ,Watch Case Opener / Bands Pin Removal Tools $34.99

100 SPARE PINS WATCH BRACELET PIN REMOVER 16 TOOL KIT $31.60

288 Spring Bars Set & 2 Watch Pin Link Remover Tools $28.99

16-Pc Deluxe Watch Repair Tool Kit Pin Remover Opener $28.50

5 Pieces PC Watch Repair Tool Kit Set Pin Strap Remover $28.44

Watchmakers Watch Bank Link Pin Adjust Removal Repair Plier Tool+3 Spare Pins $28.03

Watch Band Link Adjust Remover Repair Tool+3 Spare Pins $27.53

700 Spring Bars & 3 Watch Pin Link Band Remover Tools $27.50

20pcs Watch Case opener Pin/hand Remover Repair Tool Wrist Watchmakers Set Kit $26.05

18x Watch Repair Tool Case Opener Strap Pin Remover Kit $25.99

SWISS Watch Bracelet Adjustment Pin Removal Tool $25.49

SWISS Watch Bracelet Adjustment Pin Removal Tool $25.49

20-Piece Deluxe Watch Repair Tool Kit Screwdrivers Watchband Link Pin Remover $24.99

NEW,WATCH BAND LINK PIN ADJUSTER AND REMOVER TOOL $24.99

84 Spring Bars & 3 Watch Band Pin Link Remover Tools $24.99

Watch Band Link Adjust Remover Repair Tool+3 Spare Pins $24.98

16 Piece Watch Case Band Strap Pin Repair Remover Tools $24.97

Watch Bracelet Pin Remover & Press Multipurpose Tools $24.00

13pcs Watch Repair Tool Set Case Opener Pin Remover $23.99

16 in 1 Tool Kit Watchmaker Tools Repair Pin Remover $23.95

Ultimate Ultrapress Watch Bracelet Pin Remover tool $23.77

WATCH STRAP LINK PIN REMOVER TOOL 4 STAINLESS BANDS T43 $23.68

18x Watch Repair Tool Case Opener Strap Pin Remover Kit $23.68

NEW! STRAP HOLE PUNCH & LINK PIN REMOVER WATCH TOOL T15 $23.68

Paylak TSLK4 Watch Band Pin Link Remover and Plier Sizing Pouch $23.64

200 Spring Bars & 3 Watch Pin Link Band Remover Tools $23.50

Hand Held 6″ Plier Type Watchband Pin Link Remover $22.95

Metal Watch Band Pin Link Remover Tool & 2 Books $22.50

QUALITY 20 PIECE WATCH REPAIR TOOL KIT SET PIN + PRO BACK REMOVER + CASE VICE 16 $22.04

7 Pieces PC Watch Repair Tool Kit Set Pin Strap Remover $21.84

Deluxe Wrist Watch Link Pin Removal Pliers Band Sizer $21.49

Suissetek Watch Mini Pliers for bracelet pin removal $21.22

Link Pin Remover Watch Band Bracelet Repair Tool Kit $20.99

2pcs Aluminum Watchband Pin Remover Spring Bar Link Adjust Tool 0124 $20.52

link remover FOR EXTRA LARGE bracelet straps bands repair & spare pins $20.52

8 pcs. Watchband Remover 1.0 0.9 0.8 0.7 Spring Bar Adjust With Spare pins 0120 $20.52

Watch Band Link Pin Adjust Remover Tool + 3 spare 0074 $19.99

18pcs Watch Repair Tool Set Case Opener Pin Removal NEW $19.98

18pcs Watch Repair Tool Set Case Opener Pin Remover $19.98

Watch Band Link Pin Adjust Remover Tool + 3 spare 0074 $19.73

2pcs. 0125 Aluminum Watch Band Pin and Link Remover Tool Adjustable Height 0722 $19.73

Watch Band Link Adjust Remover Repair Tool+3 Spare Pins $19.58

8 pcs. Watchband Remover 1.0 0.9 0.8 0.7 Spring Bar Adjust With Spare pins 0120 $18.99

8 pcs. Watchband Remover 1.0 0.9 0.8 0.7 Spring Bar Adjust With Spare pins 0120 $18.99

2pcs Aluminum Watchband Pin Remover Spring Bar Link Adjust Tool 0124 $18.99

12pcs Watch Band Pin Case Opener Repair Remover Tool Kit $18.99

0149 Watchband Pin Remover Spring Bar Link Adjust Tool $18.99

New 17pcs Horologe Watch Link Pin Remover Case opener Repair Tool Set Kit $18.99

WATCH STRAP BAR PIN LINK REPAIR ADJUST REMOVER TOOL NEW $18.94

Upright Watch link remover tool for bracelet strap band pin repair spare pins $18.94

8pcs. Watchband Pin Remover 0.90 0.80 0.70 0.60 Spring Bar Link Adjust Tool 0107 $18.94

New Watch Band Strap Link Pin Remover Adjustment Tool $18.55

Watch Band Adjuster Strap Pin Link Remover Repair Tool $18.94

16 PIECE WATCH REPAIR TOOL KIT SET PIN & BACK REMOVER $18.94

NEW WATCH BAND REPAIR PIN REMOVER STRAP ADJUSTER TOOL H $18.94

16 PIECE WATCH REPAIR TOOL KIT SET PIN & BACK REMOVER $18.94

Watches New Bracelet Pin Remover Link Adjusting Tool $18.80

0149 Watchband Pin Remover Spring Bar Link Adjust Tool $18.31

Watch Opener Tool Repair Pin Remover Set for Watchmaker $18.00

8pcs. Watchband Pin Remover 0.90 0.80 0.70 0.60 Spring Bar Link Adjust Tool 0107 $17.99

8pcs. Watchband Pin Remover 0.90 0.80 0.70 0.60 Spring Bar Link Adjust Tool 0107 $17.99

Watches New Bracelet Pin Remover Link Adjusting Tool $17.90

Watch Bank Link Pin Removal Pliers $17.78

Watchmakers Watch Bank Link Pin Removal Plier Tool $17.78

Watch Band Link Pin Remover $17.68

Watch Opener Tool Repair Pin Remover Set for Watchmaker $17.48

Watch Opener Tool Repair Pin Remover Set for Watchmaker $17.48

New Watch Band Strap Link Pin Remover Adjustment Tool $17.45

Best Watch Link Pin Remover Pin Adjuster on the market $17.36

Bolt Action Firing Pin Removal Tool Firing Pin Removal Tool $69.99 A third hand for removing the firing pin from Remington and Ruger bolt action rifles without lost parts or sore fingers that sometimes accompany this tricky job. Install the correct bushing for your rifle in the end of the tool body. Screw the firing pin assembly into the bushing and tighten the threaded steel shank to compress and capture the mainspring. The hollow shank protects the firing pin tip as it slides over the pin to compress the spring. The crosspin can then be driven out with a punch and the spring tension relieved by gradually loosening the shank. Includes bushings for Remington 700 family and Ruger M77® Mark II rifles. Built-in storage slot holds the unused bushing on the t Mfg: Brownells SPECS: Aluminum base hardcoat anodized black. Hardened tool steel screw shank and bushings black oxide finish. Body – 5¼” (13.34cm) long 1” (2.54cm) wide 1-3⁄16" (3.02cm) high. Shank – 3½” (8.89cm) long. Fits Remington 700 710 721 722 Model Seven XP-100 M24 and 40X;

BOLT ACTION FIRING PIN REMOVAL TOOL FIRING PIN REMOVAL TOOL $69.99 A third hand for removing the firing pin from Remington and Ruger bolt action rifles without lost parts or sore fingers that sometimes accompany this tricky job. Install the correct bushing for your rifle in the end of the tool body. Screw the firing pin assembly into the bushing, and tighten the threaded, steel shank to compress and capture the mainspring. The hollow shank protects the firing pin tip as it slides over the pin to compress the spring. The crosspin can then be driven out with a punch, and the spring tension relieved by gradually loosening the shank. Includes bushings for Remington 700 family and Ruger M77® Mark II rifles. Built-in storage slot holds the unused bushi SPECS: Aluminum base, hardcoat anodized, black. Hardened tool steel screw shank and bushings, black oxide finish. Body – 5¼” (13.34cm) long, 1” (2.54cm) wide, 1-3⁄16″ (3.02cm) high. Shank – 3½” (8.89cm) long. Fits Remington 700, 710, 721, 722, Model Seven, XP-100, M24, and 40X; Ruger M77

Lock Technology Subaru Axle Pin Removal Tool. Each $17.72 Manufacturer: Lock Technology. Each. Features and Benefits: Removes and installs roll pins for easy axle removal This tool has magnetized tip to help the roll pin from falling into hidden access areas around axle The magnetized strip holds new roll pin f

Vim Products VIMV231 75 Degree Offset Push Pin Removal Pliers $51.08 VIM Push pin pliers are designed to remove plastic push pins on Honda Toyota GM Saturn and many other vehicles. Special ground tips remove the pins without damage. 75 Degree offset head allows push pin removal in tight areas. Dimension:

Lock Technology LTI730 Subaru Axle Pin Removal Tool $31.88 Removes and installs roll pins for easy axle removal. This tool has magnetized tip to help the roll pin from falling into hidden access areas around axle. The magnetized strip holds new roll pin for easy alignment and insertion into new axle.

KD Tools KD 3729 Push Pin Removal Plier $35.31 The best and only way to remove push pins without damage. Spring loaded for ease of use. Specially designed for removal of push pins with center locking pin. Quickly removes plastic anchors that have center pins without damage to pins or anchor. Tool lifts the center pin and pulls anchor in one simple step. New Push Pin Plier fits into pin slots and under the center pin. Anchors common on Honda Toyota GM Ford Chrysler and many other late model vehicles. Double Cushion Grip Handle. 30 degree 0ff set.

Ejector Removal Tool Ejector Removal Tool $60.99 Versatile fixture lets you remove plunger-style ejectors from standard .700" and .510" diameter bolts quickly and safely without launching parts across the room. Works for a variety of popular rifles including AR-15 AR-style .308 rifles Remington 700 Winchester 70 Savage and Sako. Rugged lightweight body machined from 6061 billet aluminum securely holds bolt while threaded tool steel shank compresses and captures ejector spring and aligns the roll pin for easy removal with a punch. Gradually loosen the shank to relieve spring tension. Check out the video demonstration of proper bolt disassembly with the Brownells Ejector Removal Tool. Mfg: Brownells SPECS: Anodized 6061 aluminum body dark green steel shank. 3-13⁄16" (9.7cm) long with shank fully screwed in 2¼" (5.7cm) wide 1¾" (4.5cm) high. Fits AR-15 AR-style .308 rifles Remington 700 Winchester 70 Savage and Sako rifles.

Vim Products VIMV2300 Push Pin Removal Pliers Set $89.08 Includes V230 Straight Pliers and V231 75 Degree Offset Pliers VIM Push pin pliers are designed to remove plastic push pins on Honda Toyota GM Saturn and many other vehicles. Special ground tips remove the pins without damage. V230 Pliers can also be used to remove UJoint circle clips. V231 has a 75 degree offset head to allow push pin removal in tight areas. These tools will save you time and frustration.

Fun Things That Every Bowler Should Know About The Bowling Pin

Many bowlers may take bowling pins for granted. I mean, after all, they are every bowler’s nightmare. The object is to remove them as quickly as possible, so most bowlers may not actually take the time to learn about them.

There are many different types of bowling pin. They are used in a wide variety of bowling games.
The traditional bowling pins that most people think of are the type used in the game of tenpins. Tenpin bowling pins are generally 4.75 inches wide at their widest point and 15 inches tall. They look a bit like armless, legless people, with a “body” and a smaller “head”, or top portion. Most of them also have a reddish colored marking around the “neck”.

A tenpin bowling pin generally weighs 3 pounds and six ounces. However, as of 1998, the American Bowling Congress passed a rule, which allows tenpin bowling pins to weigh 3 pounds and 10 ounces.

Another popular bowling pin is the pin used in duckpin bowling. Duckpins look similar to tenpin pins. However, duckpins are a good deal shorter. Regulation Duckpins are 9 13/32 inches tall, with a maximum diameter of 4 1/8 inches, and a minimum diameter of 1 3/8 inches at the base. Duckpin bowling is most popular along the eastern coast of the United States, in such states ad Virginia.

Candlepin bowling pins are another interesting variety of bowling pins. Candlepin bowling is popular in New England. Candlepin bowling pins are entirely unique. They do not resemble the pins used in any other popular bowling game.

A candlepin bowling pin is the tallest of all at 15-3/4 inches, but only 2-15/16 inches wide and 2 lb, 8 oz in weight. They are almost cylindrical in shape. They are flat on both top and bottom. They do not have a “head” or a “neck” like other pins. In fact, candlepin bowling pins, unlike other types of bowling pins, are reversible. They can be placed on the playing field with either end up. In fact, the name “candlepin bowling” comes from the shape of the pins.

Another interesting fact about bowling pins is that bowling pins are made out of hard rock maple wood. The general shape is glued together and then the pin is turned on a lathe to give it its individual shape. After that, each bowling pin is coated in a plastic material and painted. It is then given a shiny finish.

The wood that is required to make a bowling pin has to be of a certain quality. Any wood will not do, since some are prone to easy chipping. The particular wood required to make bowling pins is very hard to come by. As a result, there have been many efforts to make bowling pins out of other materials, such as plastic. So far, these efforts have not been successful.

I hope you have enjoyed these fun and interesting facts about every bowler’s friend and enemy, the bowling pin.

About the Author

Get all the latest in bowling know how from the one and only true source at http://www.bowlingquestions.com Be sure to check our our bowling pin page.

High school junior Spieth makes cut at Byron Nelson
IRVING — Jordan Spieth did something Tiger Woods couldn’t do. And his pal Tony Romo showed up to watch.Who the heck is this guy?Spieth is a high school junior from Dallas who cut class this week to play in the Byron Nelson Championship, becoming the …